My Art Blog

My Art Blog

Category Archives: resin bound

Complete Excavation Works For Resin Drive

Posted on by

Complete Excavation Works
If your existing driveway, patio area or course remains in poor problem or if you have no existing tough surface area or are looking to expand your exterior area, we will embark on the required preparation benefit a resin bound system.

Initially, we excavate down to an ideal deepness to get rid of the existing surface area.
Then, we install a below base of kind 3 granular or comparable (175mm).
Next, a base of 10mm open rated porous tarmac is laid, approximately 60mm. This enables the water to drain via.


Finally, your very own option of a resin bound accumulation is laid at a minimum deepness of 18mm to complete your green exterior location.
We either mount block paving setts to serve as a bordering kerb or a concrete kerb. One of the most preferred option without a doubt is a Marshall Tegula 160mm x 120mm.

Our preferred tarmac is 10mm open graded tarmac, as it is permeable and allows any kind of surface water to drain pipes back into the below base. Concrete, on the other hand, is non-porous and also for that reason is not eco-friendly.

If you need a bigger driveway, a resin bound surface supplies an affordable service as we can set up the resin in addition to your existing driveway, leaving just the prolonged area looking for a new structure. The resulting appearance will be seamless. For comparison, if you were aiming to extend your block led driveway, your existing surface would certainly need to be pulled up in order to achieve a totally blended look. This would certainly not be an economical service.

What can Resin Gravel be applied over?

Posted on by


An attractive advantage of resin bound is that it can be applied over tarmac, concrete, block paving as well as patio slabs, hence saving time and money. We will certainly check and also fix your existing surface area where required, prior to power-washing it ahead of the improvement of your outdoor space. As the existing surface is left in situ, we can mount your new material bound surface in just a solitary day in most cases.

As material bound crushed rock is incredibly porous, even hefty rainfall will certainly not collect in puddles on your new surface area. If your existing surface is prone to pools, we will pierce openings in it before installing your material bound surface to make sure that all water drains pipes back into the sub base.

With a puddle free driveway, outdoor patio or path, your surface will certainly continue to be slip-free also during Winter season. Please examine our photos as well as videos to see simply how well the water drains pipes.

If your driveway remains in permanent condition or you have no existing difficult surface, we undertake all foundations going back to square one.

The overlay procedure–.

Step 1– We clean the existing surface area to eliminate all unwanted surface area dust as well as moss accumulate. This ensures the surface is in stature condition to make it possible for the resin to create a strong bond with the surface.

Step 2– Mount bordering if called for. With numerous overlay driveways, we make use of a Dural stainless-steel bordering strip which we screw right into the difficult surface area. This works as a bordering for the resin bound surface. Stainless-steel edging strips use a cool coating at an extremely low cost. Alternatives to the Dural bordering strip consist of the Marshalls Tegula conventional block or the Driveline paving block. These can truly set your driveway off and also are readily available in a large selection of colours to match your accumulation. If camouflage infill manhole covers are called for, these will be set up.

Step 3– We prime the driveway to form a wonderful bond for our 18mm of combined accumulation.

Step 4– Infill the selected area with 18mm of a blended accumulation rock, commonly 25% at 1-3mm and also 75% at 2-5mm. This is totally hand shovelled down by one our extremely trained personnel to form a solid, smooth, totally porous surface!

We intend to beat any like-for-like quote, so why not call today for more information about our overlay systems and also receive a complimentary quotation for your picked surface!